Archive of July 2016

Hands-on With IWC Portugieser Chronograph Rattrapante Edition "Boutique Milano" 41mm Replkica

On the occasion of the opening of its third Italian boutique - after Rome and Venice - in the heart of Milan’s luxury shopping area, IWC Mens Replica introduced the new Portugieser Chronograph Rattrapante Edition "Boutique Milano" (Ref. IW371215), a 100-piece limited edition.


In some way this timepiece can be considered the successor of the Portuguese Rattrapante Ref. IW3712-14, a 300-piece limited edition created for the Italian market in 2006.

The IWC Portugieser Chronograph Rattrapante Edition "Boutique Milano" Replica features, at 10 o’clock, the characteristic third button for the rattrapante mechanism.

Unlike a standard chronograph, the rattrapante or split-seconds chronograph has two hands that start simultaneously. The rattrapante hand, which is superimposed on the stopreplica watch hand, can be stopped independently using a third button at 10 o’clock, while the stopreplica watch hand continues to run. This permits the user to record two separate times, exact to the second, within any given minute. If the third button is pushed again, the split-seconds hand instantaneously catches up and is synchronised with the other hand.


Offering water resistance to 30 metres / 100 feet, the 41 mm x 12.5 mm red gold case frames a beautiful blue dial with tachymetric scale and telemetric scale. The latter is used to calculate the distance of an event (lighting, for example) based on the time interval from when the lightning is seen to when the sound is heard.

The hand-wound IWC-manufactured calibre 76240 beats at a frequency of 4 Hz (28,800 vibrations per hour) and guarantees a power reserve of 48 hours.


The connection with Milan is emphasised by the back case incision evoking the "Biscione", the grass snake of the Visconti noble dynasty which became the symbol of the city during the Middle Ages. The back case also displays the individual number of each of the 100 pieces that will be produced.


Hands-on With Breitling Transocean 38 Replica Watch

Breitling is very likely a brand that needs no introduction for most of us. While I can’t say I’m intimately familiar with all of the lineup, I have a passing knowledge of the brand. And it has stayed passing, because I have not found High Quality Replica Watches in their lineup that have appealed to be previously. While I appreciate the aviation heritage, the dials have often felt too cluttered for a landlubber like me. That is, until I came across the Breitling Transocean 38 Replica.

This new Transocean is an extension of the same storied line that has been in production for over 55 years now. The original was intended as a travel companion for overseas, long-haul flying. 


While there is nothing in the PR materials that would suggest this to be a vintage (or heritage) model, it definitely has that feel to it. For starters, take the case diameter. While the 38mm polished steel case works in today’s world as a sort of unisex sizing, to my eye it goes directly back to the smaller Replica Watches of fifty-plus years ago. Then, within that case, you’ve got a matte black dial, on top of which are set stick-style applied indices, a crisp white subseconds dial (which I appreciate that it is not outlined), and what appear to be luminous (and nicely sized) stick hands for the main time.

If that all weren’t enough for the throwback feeling, we have the Replica Breitling B, in gold, topping the dial. If things stopped there, we’d have a simple look back into the Breitling Mens Replica catalog. Mixing things up a bit are some very modern touches. First and foremost, there is the large date display just below the B, which is a rather uncommon position, but I like the stance it gives the dial. Keeping things modern as well is the 100m WR and sapphire crystal, which both serve to protect the COSC-rated Breitling Caliber 16 movement.

Last, but not least, there’s the matter of the mesh bracelet that is available. On one hand, it does call to mind the mesh bracelets of the 60s, but I would imagine that it imparts a very solid feel to the wrist that is very modern thing. Of course, you could also opt for the other leather strap, if you want to lighten things up a bit.

All in all, this is the first Breitling that I can say I honestly sat up and took a close notice of. There is a great mix of styling here for many people (including a mix of dials, including some MOP options), and it’s a classic style that I just plain like. 


Take A Look At The Ulysse Nardin Hourstriker Erotica Jarretiere Replica

Ulysse Nardin Mens Replicas are known for continuing this tradition with several references in their collection depicting classy but sexy scenes. There are also other features that Ulysse Nardin is known for, like Jaquemarts (some sort of automatons that can also be found in the ultra-complicated Hannibal Minute Repeater Tourbillon) and chiming replica watches. The new Ulysse Nardin Hourstriker Erotica Jarretiere mixes these 3 features for a complicated erotic replica watch.


The black onyx dial reveals a typical Venetian decor. The handcrafted miniature painting in white are perfectly contrasted the glossy pitch black dial while the balcony on the bottom of the dial and the two characters are engraved in solid gold (white gold on the platinum edition and rose gold on the rose gold edition). Behind the chaise is an exterior view of the iconic Rialto Bridge arching majestically over Venice’s Grand Canal. The Ulysse Nardin Hourstriker Erotica Jarretiere Replica comes with the brand’s classical case, with the two-step lugs and a 42mm diameter.


This swiss replica watch requires some audaciousness to be able to sport on your wrist a replica watch with an erotic scene. Ulysse Nardin introduces here an elegant and highly complicated timepiece that features 2 of the most traditional and hard to achieve complications: automatons and a strike of the hours and half hours. The self-winding movement (calibre UN 611) comprises a mechanism that automatically strikes the hours and half hours while the engraved characters on the dial move. The movement boasts 42 hours of power reserve.



Corum Coin Watch 50th Anniversary Limited Edition Replica Watch Series

Of course, the more established things, like stamps and coins, have places on the web you can go to. If you want to start blending these collections, however, then it gets a bit more tricky. For 50 years now, coin collectors have had a very prominent Corum Coin replica watch that they could aspire to collect from Corum. Since we're now at that golden anniversary, it should be no surprise that we now have the Corum Coin Watch 50th Anniversary replica watch.


Now, we will have to give the brand a little bit of latitude when it comes to celebrating this anniversary – the very first Corum Coin replica Watch was introduced in 1964, and of course, we are now in 2016. How to get around that little detail? Well, by using coins minted in 2014. These were apparently sorted through and selected as being prime examples of what these coins are, and have never been in circulation. And, other than a hole drilled in them to get the central arbor through, there are no visible modifications to the coin.


Provided the sapphire crystal up top stays in the Corum Coin High Quality Replica Watch, it is likely a coin that will never see any other modifications or wear. As is appropriate for the Corum Coin replica Watch, the sides of the case (36mm for the gold, 43mm for the silver) feature a coin edge – perhaps the best use of this particular finishing trick. To my eyes, the bezel surrounding the crystal also has the look of a coin, which gives the appearance, then, of simply having a coin with some lugs attached that is sitting on your wrist.

I myself have never been a coin collector, but I like the 50th Anniversary edition of the Corum Coin replica Watch very much. If you want to pick one up for yourself (or your great-great grandson, according to the marketing materials), you can either buy one individually, or get yourself a set – as a good coin collector does, I suppose. 


Show You The Replica Vacheron Constantin Métiers d’Art Les Univers Infinis timepiece

The interlocking repetitive motifs that create a striking optimal illusion are assembled in a white-gold case. It has slender hollow hands that provide a complete view of the art of tessellation.

The new Métiers d’Art Les Univers Infinis timepiece is created using the technique of periodic paving, which lends it a hypnotic effect. Additionally, the craftsmen have also used gold and mother-of-pearl marquetry along with fine gem setting and guilloché work. In keeping with the tradition, Vacheron Constantin Replica has introduced a new, limited-edition Métiers d’Art Les Univers Infinis – Horesman watch.


Creating a confluence of art and fine horology has been an ideology for luxury replica watchmakers for almost a decade now. The replica watch has a Calibre 2460, a mechanical self-winding movement that is the signature of Vacheron Constantin Replica Watch. The sapphire crystal case-back flaunts hand-drawn flanks, circular-grained mainplate, bridges adorned with a Côtes de Genève motif and the gold oscillating weight with crossweave guilloché pattern.


Paying a tribute to the graphic art of tessellation from the artist, the timepiece’s first edition was unveiled at the Salon International de la Haute Horlogerie in Geneva in 2012.
This timepiece is the second piece in the series that is inspired by the work of Dutch artist Cornelis Escher. It is available at Vacheron Constantin Replica boutiques in India. This art-inspired timepiece is limited to 20 individually numbered pieces and is priced at INR 78 lakhs.